FN485 modules

Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /home/zlyimz/public_html/templates/shape5_vertex/vertex/responsive/responsive_mobile_menu.php on line 158

The FN485 modules are daisy-chained on a two-wire bus. The bus length can be up to 1200m. Using multiple buses is also possible.

6 Channel FN485 Bus Smart Dimmer

The FN485-6x2AD is a 6 Channel FN485 Bus Smart Dimmer that can work in both leading edge and trailing edge modes. All types of load can be dimmed or switched with it, be it resistive, capacitive or inductive. It also measures the power consumption of the outputs.

8 Channel FN485 Bus Relay Switch

The FN485-8x16A 8 Channel Relay Module is used for switching any kind of load that do not exceed the output specifications either via its local inputs or via FN485 bus.

4 Channel FN485 Bus Window Covering Controller

The FN485-4xSH four channel Intelligent DIN Rail Mountable Window Covering Controller is used for controlling motorized blinds, shutters awnings and projector screens or any other device equipped with four-wire bidirectional AC motor and built-in limit switches. The motors can be controlled either via the module's local inputs or via the FN485 bus.

4 Channel FN485 Bus 0-10V Analog Output Module

The FN485-4x0-10V four channel Intelligent DIN Rail Mountable Analog Output Module is used for dimming fluorescent and LED lighting systems (using an appropriate ballast/driver with 0-10V or 1-10V input) either via its local inputs or via FN485 bus.

FN485/RS232 Bus Interface

The FN485 Gateway is a gateway between automation controllers and the FN485 bus. It is not merely an RS232/FN485 convertor but it converts the master/slave FN-485 bus architecture into an event driven multi-master bus architecture. It is recommended for installations where prompt status information of FN485 module inputs and outputs is required.

3 Channel FN485 Bus Line Voltage Dimmer

The FN485-3x1kDH three channel Intelligent DIN Rail Mountable Dimmer is used for switching and dimming incandescent and halogen lighting loads either via its local inputs or via FN485 bus.